Death Wobble Cure. Death wobble is usually caused by a loose or worn out trackbar and or trackbar bushing. Once you get the dreaded death wobble it ony gets worse since many time it eggs out the lower trackbar hole and therefore allows the trackbar to move back and forth. Our HD trackbar bolt kit with HD bushing and 9/16s bolt is your answer.
This is a new flange bolt kit which is now used on all of our HD trackbar kits. Our HD trackbars use a larger bushings which has a 9/16 through hole shown below. This will require you to drill out the OEM axle side trackbar location. Now the OEM nut and flange do not work and this is were this bracket works very nicely. Laser cut from 1/8, cnc bent, all metal lock nut welded, and gold zinc plated. Comes with 2 washers and a 9/16s grade 8 fine thread bolt. Already have a Clayton Off Road trackbar? No problem. Buy this flange tab, and this new bushing, press out the old one, press in the new one, and you have a HD trackbar. Fits many aftermarket trackbars as well. Or you can buy this kit and our trackbar bushing and weld on a new housing. Or simply buy our entire trackbar.
- 9/16-18 x 3" Grade 8 bolt, 2 washers and then all metal lock nut come welded to the 1/8 flange. Approximate torque spec = 146 ft/lbs
- 9/16s Grade 8 Bolt
- Lock Nut Welded To Flang
- MADE IN THE USA!